|
133:135
Kelderman Hydraulic Bed Lifts
Kelderman Air Ride has developed a unique hydraulic bed lift for medium duty trucks. The system was developedto allow for easy loading and unloading of equipment that might not otherwise be possible to load and unloadin the tall bed of medium duty trucks.
The kits require factory installation in Oskaloosa, Iowa.
Bed lifts available starting at $9,999, for most medium duty trucks.
Call for more information.
» Allows for easy loading and unloading of heavy equipment, motorcycles, jet skis, etc.
» Includes hand-held remote control operation
» Includes hydraulic power pack
» Quick detach for different beds
Images Do Not Necessarily Represent The Content Of The Kit That You Order
Are
You Looking For a Body Lift?
If so,
check out our wide range of Body Lift Kit manufactures. They include
Performance Accessories, Skyjacker, Superlift and many others. |
 |
FAQ's
Frequently Asked Questions
» Can I run the bags empty?
It will not hurt the bags to run empty, but the ride will be very harsh. When the bags are empty, you probably will not be able to turn very sharp because the tires will rub on the lower rear part of the fenders.
» How tall can I run the bags?
Running the bags completely topped out will not only yield a harsh ride, but typically put the pinion angles, driveline and alignment out of specs. It will ride harsh because there is no rebound if they are topped out. When the bags are all the way up, the front left tire will tend to be sticking out of the front fender well farther than the right front.
» Should the bottom of the bag be straight?
Not being straight will not hurt the bags. Air bags are run in industrial applications up to 30 degrees. We try to keep the bags straight as possible, but the bottoms may be angled a little as the pinion angle of the axle is set. As far as up and down goes, the kits are designed for the bags to set pretty square. If your application has an adjustable panhard bar, use that to make sure the axle has the same amount sticking out from side to side. Once this is equal, the bags should be straight.
» Do the bags wear out?
As long as the bags do not have anything rubbing on them, they should last for years. Periodically check your bags to make sure nothing is rubbing on them and no rocks or debris has lodged in between the air bags and steel framework. Be sure to thoroughly wash the bags after mudding. Blowing a bag should be no rarer than getting a flat tire.
» What should my bag's height be?
Use the following chart to monitor your bags heights.
| Bag Number |
Air |
Ride Height |
| 8979 bag |
6.5 inches |
11-13 inches |
| 5323 bag |
4.5 inches |
7-9 inches |
| 9619 bag |
10.5 inches |
14-18 inches |
| 5770 bag |
4 inches |
7-9 inches |
» Do I need limiting straps?
Unless you are planning on jumping your truck, limiting straps are not required. The only other time they would be helpful is if the truck is going to be lifted by a frame hoist/lift with the shocks removed.
» Can I blow up a bag?
The bags are designed by Firestone to be operated at a maximum continuous pressure of 100 psi. The bags are also pressure tested to operate at over 300 pound spikes. With the air compressors that we use, it would be very difficult to blow up a bag.
Kelderman Hydraulic Bed Lift Kits are especially assembled for medium duty trucks and it was developed to facilitate loading and unloading of equipments from the trucks.Kelderman Hydraulic Bed lift kit features expertly custom-made hydraulics in which you can easily manuever with the remote and bed. With its remote activation and separating bed feature, it makes the hard work a lot easier.
Kelderman Hydraulic Bed lift kits guarantees the best performance and functionality of your medium duty trucks. And we definitely assure you that we only provide state of the art Kelderman Truck Bed Lift employed with the best manufacturing techniques, Kelderman Hydraulic Bed lift kits brings nothing but the best in the market. Please refer to our contact information for more details on our Kelderman Truck Bed Lift.
Their Kelderman Hydraulic Bed lift kit require factory installation that's why an installation appointment is needed.
If ever you would need help on how to acquire Hydraulic Bed Lift Kelderman, our line is open anytime to give you assistance.
|